HLG-150h pụtara mmiri akwa ikuku ike
Nkọwapụta ngwaahịa
MindProof 150w otu anaghị enye ike ọkụ , Ihe nlere nke ndi a na-ejikarị ya na oriọna ' sbiod , HLG -150 H - 12 , HLG-150 , HLG - 150 , wdg ụfọdụ ụdị maka ụdị ọkụ dị iche iche.
HLG-150 H -12 LERE: IP67 gosiri. USB maka m / o njikọ.
HLG-150 H -12A: EP65 Rated. Enwere ike idozigharị voltaji na mgbe niile ugbu a nwere ike idozi ya site na potentiometer.
HLG-150 H -12b: ip67. Elekere anya ugbu a na-edozigharị site na eriri na-emepụta site na 1 ~ 10vdc ma ọ bụ nkwụnye pwm ma ọ bụ iguzogide.
HLG-150 H -12D (nhọrọ): IP67 gosiri. Ọrụ ndị na-emegharị oge, kọntaktị pụtara nke ọma maka nkọwapụta.
|
Model
|
HLG-150H-12
|
HLG-150H-15
|
HLG-150H-24
|
|
Output
|
DC VOLTAGE
|
12V
|
15V
|
24V
|
|
CURRENT ADJ. RANGE
|
Can be adjusted by internal potentiometer A type only
|
|
7.5-12.5A
|
6-10A
|
3.8-6.3A
|
|
RATED POWER
|
150W
|
150W
|
151.2W
|
|
VOLTAGE ADJ. RANGE
|
10.8-13.5V
|
13.5-17V
|
22-27V
|
|
Input
|
Voltage Range
|
90-264VAC 127-370V DC
|
|
Frequency Range
|
47-63Hz
|
|
POWER FACTOR
|
PF>0.98/115VAC, PF>0.95/230VAC, at full load (Please refer to "Power Factor Characteristic" curve)
|
|
Efficiency(Typ.)(230Vac)
|
92%
|
92.5%
|
93.5%
|
|
AC CURRENT (Typ.)
|
1.7A / 115VAC 0.75A / 230VAC
|
|
INRUSH CURRENT(Typ.)
|
COLD START 75A/230VAC
|
|
LEAKAGE CURRENT
|
<0.75mA / 240VAC
|
|
PROTECTION
|
OVER LOAD
|
95~ 108%
|
|
Protection type : Constant current limiting, recovers automatically after fault condition is removed
|
|
SHORT CIRCUIT
|
Constant current limiting, recovers automatically after fault condition is removed
|
|
OVER VOLTAGE
|
14-17V
|
18-21V
|
28-34V
|
|
Protection type :Shut down O/P voltage, re-power on to recover
|
|
OVER TEMPERATURE
|
100 ℃ up or less10 ℃ (RTH2)
|
|
Protection type : Shut down and latch off o/p voltage, recovers automatically after temperature goes down
|
|
Environment
|
WORKING TEMP.
|
-40 ~ +70 ℃(Refer to output load derating curve)
|
|
WORKING HUMIDITY
|
20 ~ 95% RH non-condensing
|
|
SAFETY
|
SAFETY STANDARDS
|
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;
design refer to UL60950-1, TUV EN60950-1
|
|
WITHSTAND VOLTAGE
|
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
|
|
ISOLATION RESISTANCE
|
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH
|
|
EMC EMISSION
|
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3
|
|
EMC IMMUNITY
|
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
|
|
Others
|
MTBF
|
192.2K hrs min. MIL-HDBK-217F (25℃ )
|
|
DIMENSION
|
228*68*38.8mm (L*W*H)
|
|
PACKING
|
1.15Kg; 12pcs/14.8Kg/0.8CUFT
|
|
Note
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. Type A only.
6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. Refer to warranty statement.
|
1. A na-atụle paramita niile a na-ekwukarị na 230vac ndenye, ibu dị elu na 25 nke ikuku dị iche iche. Dee
2. A na-atụle mkpọtụ & mkpọtụ na Bandwidth site na iji otu iri na abụọ "gbagọrọ agbagọ na-akwụ ụgwọ nke 0.17UF Portallet Capacel Capallel Capallel Capallel Capallel Capallel Capallel Capital Capal.
3. Nghọta: gụnyere ịtọzi nnabata, usoro iwu na usoro ibu.
4. Enwere ike ịdị mkpa na nhọrọ ntinye ala. Biko lelee njirimara static maka nkọwa ndị ọzọ.
5. Pịnye naanị.
6. Nchedo na EMC na-ezo aka na en60598-1, CNS15233, GB7000.1, FCC Part18.
7. Ogologo oge a kara aka na mbido mbu. Na-atụgharị ma gbanyụọ ike ọkọnọ nwere ike ibute mmụba n'oge a kara aka.
8. A na-ahụta ọkụ dị ka akụrụngwa nke a ga-arụ ọrụ na ngwa ọrụ ikpeazụ. Ebe ọ bụ na arụmọrụ EMC ga-emetụta Ntinye zuru oke, ndị na-eme ihe ndị ikpeazụ ga-emegharị EMC iwu na ntinye zuru ezu ọzọ.
9. Na-ezo aka na nkwupụta akwụkwọ ikike.
Mara: Ọkpụkpụ ụrọ na-acha uhie uhie na-acha uhie uhie, Wall Warth, Wall Warth Witness, Wall Warth Witness, Ìhè na-eme ka ala, ọkụ ọkụ, ọkụ mmiri, ọkụ mmiri, na-enwu ọkụ, na-acha uhie uhie, na-acha uhie uhie, duru Ìhè DMX, adj Dan Bed Pixel tube 360, tube tube, na-agbanwe dijitalụ na-agbanwe, na-agbadata na-agbanwe, na-eme ka ọ dị ọcha na-agbanwe , BandProof Band, Bonproof Light, DMX BARD Bar, DMX Fund Bar, RGB LED BARL BARL, RGB CRACK , DJ Light Bar, DJ DED WED BAR, Esi wụnye otu WED WED Bar, L Ed Gow Bard Agba Agba Agba Agbanwe, Starville duziri, An American Dr, Mermer Bar, Gwuo Light, Disto Light, 3D Gue Fubi, Ìhè Vidiyo, ọkụ mmiri, ọkụ mmiri, ọkụ na-acha uhie uhie, na-eme ka ọkụ na-egwu egwu, 3d like Ìhè, disco bọl, bọọlụ 3d, spixel bọl, spix na-eduga, bọọlụ 36, pịa bọl, na-eduga bọọlụ na-ewu ewu, DMX BARD Ball, kinetiti Strip na-acha uhie uhie, na-achịkwa mpempe akwụkwọ na-agbanwe, na-ejikọ ya na-acha uhie uhie, na-eduzi mpempe akwụkwọ, nke a na-ejikọ, akara nke DMX. Mpempe akwụkwọ na-acha uhie uhie, akara Pixel, na-agwa okwu nke 5 mita, na-eduzi mpempe ọkụ, n'èzí Ìhè, RGB WEBIP, Dunb Strip Strip, nke na-eme ka ọ dị mfe, na-eduzi ya, na-eme ka ọ bụrụ matrix, na-eduga na mgbidi vidiyo Ihuenyo, n'èzí na-enwu ọkụ, na-eme ka ọkụ, madrix na-enwu, Ogwe ọkụ, ebe a na-egwu mmiri, na-eduzi ebe a na-egwu egwu Ikike ụlọ, nke na-akwụ ụgwọ ụlọ, nke na-arụ ọrụ nke ọma ọkọlọtọ ike ọkọnọ na onye na-ahụ maka njikwa, ọkọlọtọ 8 nodes, ma kpọọ ya ọkụ.
Ngwaahịa : Ngwongwo eduzi > Inyefe Ike
Nchọpụta Nchọpụta (0) 
Nyochaa ileta
